AIDS

About HIV/AIDS "Fresh air can seriously damage your health". A most unlikely Government Health warning but, for the patient with Acquired Immunodeficiency Disease Syndrome, AIDS, air-borne infection presents a constant threat of pneumonia and death. Nearly all will die of diseases caused by microbes that are everywhere in the environment, and harmless to the normal, healthy individual. It could almost be said that air, water and food carry death to anyone infected with the Human Immunodeficiency Virus, HIV - the causative agent of AIDS. The World Health Organisation estimates that, by the end of the decade, ten million people will have died from AIDS-related disease, and a further forty million will be infected by HIV. This is an epidemic of plague proportion, and the majority of its victims will be from the poorest countries of sub-Saharan Africa and South East Asia.In an individual with AIDS the protective immune system has collapsed.HIV Testing AD2As a result, the individual becomes susceptible to infection by a variety of environmental microbes. These microbes present no problem to the healthy individual, but can be fatal to the AIDS patient. For instance, Pneumocystis carinii - a fungal like organism, is a major cause of pneumonia-related death in AIDS patients in the developed world. Few doctors would have encountered this infection in their normal practice before the start of the AIDS epidemic in the 1980s.Indoor swimming presents a hazard of infection from Mycobacterium avium - an organism that is found in soil, water and fresh vegetables, and is distantly related to the causative agent of Tuberculosis. Before the AIDS epidemic established itself, only twenty-four cases of Mycobacterium avium infection had ever been reported in the medical literature. In 1985 it was considered to present no health risk, even to AIDS patients. By 1990, over twelve thousand clinical...

The International and Internal essays

The International and Internal essays The International and Internal dynamics of Core-Periphery Relationships in Honduras and their Impact on the Human and Physical Landscape The historical and contemporary dynamics of Honduras core-periphery relationships both internationally and internally have had a significant impact in shaping the human and physical landscape. The topography of Honduras, limited arable land and natural resources has been a significant factor in its history and subsequent underdevelopment. The lack of development contributed to a weak state leaving Honduras particularly vulnerable to foreign exploitation and concentration of the limited arable land in the hands of both foreign owned, and elite landholders. This situation has left little land for the majority of Honduras? population, which in turn has played a role in a high level of internal rural to rural migration to marginal lands and concentration of people in these areas. The geographical representation of core-periphery relationships were fostered and reinforced through international core-periphery relationships. The internal dynamics have led to permanently altering the H onduran landscape through environmental degradation primarily deforestation. In order to tread the various variables together associated with the core-periphery relationships and the contemporary physical and human landscape this paper will focus on the historical and contemporary international core-periphery relationship between Honduras and the United States. It will then look at contemporary conflict between marginalized farmers and large landowners, which defines the internal core-periphery dynamics, specifically focusing on the Atlantic regions of Northern Honduras. This area proves to be amenable for looking at the interrelationships between land use patterns, internal migration, the farming of marginal areas and the environmental degradation associated with all three. Part One: Historical Roots, Colonizatio...

Animal Farm Essay Example | Topics and Well Written Essays - 1500 words

Animal Farm - Essay Example Comparisons between Napoleon and Snowball As part of the leadership, there are two leaders whose ideals differ as one is corrupt while the other is a subtle leader. The two leaders here are Napoleon and Snowball that are a depiction of Stalin Joseph and Trotsky Leon. Ideally, the two leaders were always on contradicting sides in terms of leadership strategies that led Napoleon to dismiss Snowball in order for him to adopt dictatorial leadership. The two leaders of the animal farm had nothing in common except that were both astounding leaders. One of the principal differences between Napoleon and Snowball was the fact that Snowball was a better speaker and had convincing power as compared to Napoleon. He was compassionate and offered support to the animals contrary to the treatment of Napoleon to the animals. This aspect made Snowball a hero as he acted on the belief that all animals in the animal farm had a right to equality (Orwell 8). ... During the existence of Snowball, the animal farm witnessed development, peace, and flourishing in which he sought to make the farm better than during the reign of farmer Jones. However, Napoleon’s rule presented aspects of slavery to the animals in which he incorporated this aspect without the knowledge of the other animal subjects (Rodden 316). Remarkably, Napoleon’s dictatorial rule was successful as compared to the communal leadership by Snowball as the farm became productive the same as the time that Farmer Jones was in control. Napoleon was a cunning leader as he led the animals in the abolition of the human rule then changed after they had achieved their freedom from the humans. He eliminates Snowball as he sees him as an impediment to the success of the farm. In essence, he negated the concept of communism as he viewed it as an aspect of backwardness and underdevelopment. His cunning ways also lead him in to constructing a windmill that Snowball had designed whi le he was alive in order to show to the animals in the farm that he was equally as good as Snowball had been to the animals. Napoleon also spreads propaganda to his own advantage as compared to Snowball who believed in honesty and truthful leadership (Rodden 318). Further, Napoleon orders for the merciless killing of animals after he amends the seven commandments that negated alcohol consumption and murder. The animals experience torture as a way of confessing their offenses within which the trained dogs owned by Napoleon execute the killings (Sapakie10). The collapse of the windmill intended to make the animals work lesser is a chance that Napoleon uses to cast blame on Snowball meaning that he applies all manner of schemes in order

MODERN JEWISH HISTORY Essay Example | Topics and Well Written Essays - 1250 words - 1

MODERN JEWISH HISTORY - Essay Example The process of Jewish assimilation involved the cultural assimilation and social integration of the Jews. The Jews used to earlier live in their own tightly integrated community and would hardly integrate with the rest of the cultures in the world. However, during the age of enlightenment, the Jews started integrating themselves with the social surrounding of other cultures in order to assimilate themselves with the east and the western parts of the world. The primary reason as to why the Jews assimilated to different parts of the world, including South America and the Caribbean was to attain nationality in such countries as a way of integrating themselves with various cultures of the world. This phenomenon happened in slow stages, although by the end of the 19th century the Jews had placed themselves with various European and South American cultures, thus socializing with them and attaining their citizenship. This paper shall now address the methods adopted by the Jews to assimilate themselves with rest of the world. When the world was on the journey of renaissance, the Jews had their own place in history. They used to live with each other in a closed nit group and would seldom interact with the rest of the cultures. ... However, Christians, Muslims and other orthodox sects regarded this as disrespect to their culture. Since the Muslims were involved in social integration with Christians, there was a sense of acceptance for them from the European world. However, the Jews never met the same fate since they did not bother to socialize with the remaining class of people. This turned out to be a fallacy for them since they were not looked in the correct perspective from the outer world. The Jews were always a tiny minority since the time their religion came into existence. The Jews were the worshippers of a single God, and the fact that they were such a tiny minority did not allow them to socially integrate with other cultures, as they thought that if they would then the importance of their religion would go down as opposed to Christians and the Muslims, who were much bigger in numbers in comparison to their Jewish counterparts. The struggle to preserve their culture, the language along with their custom was the biggest stumbling block for the Jews in their attempt to socialize with the rest of the world. Those who moved within the European vicinity and adopted the European culture were met with much criticism. The conservative Jews, thus leading to an internal conflict among the Jews as to who were the purists, regarded them as outsiders. The conservatives always opposed the idea of integration, and this led to a break in the fragmentation of Jewish culture. The conservatives never accepted the liberals, and the liberals found it hard to integrate with the socially demanding European cultures consisting of Christians and Muslims, who were in much greater numbers, thus posing a threat to their identity,

The nicotine's effect on daphnia Lab Report Example | Topics and Well Written Essays - 1500 words

The nicotine's effect on daphnia - Lab Report Example They are significant sources of food to different organism such as fish and frogs among others. Daphnia is common in laboratory experiments and have been used for years especially in drug tests among others. The most common test done using this organism is the Daphnia Heart Rate Test. Daphnia is ideal in Heart Rate Test because they are ectotherms, thus their body changes with changes in the environment. Following the fact that chemical reactions rate’s increases with an increase in temperature, it would of great use in establishing the temperature changes if Daphnias’ metabolism rate would be increased. Introduction This experiment aims at designing a hypothesis about the effect of nicotine on living organisms. The heart of Daphnia is clearly seen with the help of a low power microscope. In reference with research, which states the heart of a Daphnia beats 300 beats per minute, we can have a chance to monitor the change of the heartbeat, with change in different physio logical aspects such as chemical concentration, temperature, or changing the type of chemical or even the reaction when Daphnia are in pure water. It is necessary to note that the change in Daphnia heartbeat rate does note practically represent the human’s case. However, the examination will give us learners a chance to evaluate the effects of nicotine on metabolic processes. This experiment is under the courtesy of British Pharmacology Society (Corotto, Ceballos and Vinson, 177). Hypothesis In this experiment, Daphnia magna, which is a transparent crustacean is used to establish the effect of nicotine on heart rate. There are different results expected from the experiment based on the concentrations of the nicotine. However, because nicotine is a stimulant, thus increase metabolic rates, there are high possibilities that the heart rate will increase with the increase in the concentration of nicotine. Ultimately, the Daphnia may die because of high heart rates, as this is a f atal condition (Fitzgerald 15). Problem: what effect will nicotine have on Daphnia? Ethical issues Students should be very careful because they are expected to handle these animals in a way that illustrates good ethical attitude towards experimental animals. High is regardless of the fact that they are animals with fewer capabilities thus may not suffer as much as higher animals; overall they deserve respect. All animals should be returned to their habitats after the experiment. This will support ethical approaches put in place by different biology organizations. Equipment 1. Tobacco solution 2. 2 depression slides 3. 2 cover slips (22 x 60 mm) 4. Kleenex 5. Water from Daphnia culture of different temperature 6. Piece of cotton wool 7. Microscope – low power resolution 8. Daphnia Magna – culture of water flea 9. Daphnia anatomy chart- for source 10. 3 droppers Preparation of Tobacco solution This solution can be made from cigarettes; approximately 20 of them can make a n ideal solution. After the extract is emptied in a cup of water, place it covered for about 12 hours. Sieve the solution into another container; solutions of differing concentration should then be made where the different shall be determined by the ratio between water and the solution. The study will begin using solution with lower concentration and later use those with higher concentration in references with the guidelines by Washington Association for Biomedical Research. It is significant to note that the level of

Dynamic Modeling Laboratory

Dynamic Modeling Laboratory Chapter Three 3. Implementation of model Although the improvement of complex design system involves the development of representations for design tools and mappings, design tool environment models, and project flow definitions, these significant improvements in systems cannot be technologically advanced in isolation. After outlining the various frameworks, the developer(s) of any given model must be able to examine what is under creation to prove that the prototype meets its required purpose standards. For results to be achieved, the proposal must commence with test data from the core device that it will be used in. Mappings between different plans must be tried to guarantee that the outcome of plotting from the prototype is comparable to the original. Design device environment prototypes must be tested to guarantee that the design implement begins and end as anticipated and that they experience no problem with the figures obtainable from the end product. To make the modelling possible it involves the presence of testing environments that permit prototypes to be speedily instantiated and confirmed to warrant that interactions and reliance are as anticipated. To test plotting requires a system, which mimics the functionality of a complete plotting system, joined with prototype visualizers to enable the accuracy of the plotting to be determined. Alike testing is needed for scheme prototypes and design tool environment prototypes. To test prototypes in each of these disparities would entail very dissimilar testing environments. However, if a particular model conceptualization tool were generated for testing all joined design systems during development; the final product could be itemised in any prototype with the inventor being sure of the accuracy of the requirement. Having a single set of testing devices also permits faster integration between the testing devices, with several benefits from the different phases of testing. 3.1 Setting and Principle of model For a simulation to take place, there be existence of an environment. This environment is usually achieved through configuration that take place during the simulation process. An example of the configuration will be explained in the FMU export from Simulink that clearly explain the environment under which the FMU export is facilitated. 3.2 Implementation in Dymola Introduction Dymola with refers to the Dynamic Modeling Laboratory is a device used for modeling and simulation of incorporated and complex systems used in industries such as aerospace, automotive , robotics and other applications. With its state of the art engineering, Dymola’s abilities display novel and innovative answers for prototyping and simulation, as it is probable to simulate the vibrant conduct and intricate relations amongst structures of various production fields, such as mechanical, electrical and other control systems. This implies that users of Dymola can construct prototypes that are more joined and have simulations results that depict reality. Other highlights that can be realized of Dymola are those of Handling of large and complex multi-engineering models. Faster modelling by graphical model composition and faster simulation through symbolic pre-processing can also be achieved for purposes of increased productivity. Other befits of Dymola are it support for Open user de fined prototype modules, Open interface to other applications, 3D Simulation and Real-time simulation, but just to mention a few of its benefit. 3.2.1 Environment The Dynamic Modeling Laboratory (Dymola) setting practices the open Modelica demonstrating semantic, which implies it is open to its users. Dymola users are, therefore, free to develop their own model libraries or modify the ready-made model libraries as desired to satisfy their individual user’s unique modeling and simulation needs. With Dymola being flexible, it makes more of an adaptable device. Flexibility, therefore, brands Dymola seamless for prototyping and simulation of novel substitute strategies and skills now and in the future. FMU export from Dymola The objective of this sub-topic is to illustrate the steps that one would take when he/she is intending to export prototypes from physical simulation settings as FMUs. To be able to perform an export from a Dymola an individual would need to perform two very crucial steps. One is that of adjusting the simulation model interface and secondly perform an export the simulation model as an FMU. To achieve the export from Dymola, proceed as explained in the following: First, adjust the interface (ports) of your simulation model in existence from a physical modeling tool. It is important to note that this process of adjusting the interface must be performed in a signal-based way for purposes of properly exporting a model/ models as an FMU. The interface of the desired simulation model will be defined by input and output signals. For purposes of reliability, efficiency and better results, an individual install sensors. The installed sensors are also used to amount certain prototype conditions and actuators in order to put on physical aspects to the prototype. The second step is to Export the simulationn model as an FMU by using the FMI export functionality of your physical simulation tool. For example, the exporting functionalities of Dymola (the options for the FMI export) can be found in the Simulation Setup GUI. In export process, there are usually three settings that need to be performed. The first setting is that of sectioning a Type. The second setting is that of choosing an FMI Version and finally choosing further Options. For Type, one can set either the environment for Model exchange (FMI-ME) or Co -simulation (FMI-CS) as Model exchange exports. This is because export can either be performed using model exchange or co- simulation. In the model-exchange setting, the FMU comprises only the prototype and no slave. Therefore, the slave of the introducing simulator is used. In the co-simulation setting, the FMU comprises both the prototype and a slave. Here the importing simulator performs as the main of the co-simulation. The prototype without slaves and Co-simulation exports a summarized prototypee and slave. For Version, selecting 1.0 will ensure compatibility with V1.7 of the Modelon FMI Toolbox. In the case of Choices, it is not necessary to include the basis cypher or mass outcome in mat file. 3.3 Implementation in Simulink As in the event of Dymola, Simulink can also be used to implement different prototypes in different environs. For example in the application of control procedure, the control procedures is established in a simulation setting (MATLAB/Simulink) and verified on simulation prototypes. After that, MATLAB/Simulink can be coupled with a PLC, and the procedure is verified on a physical prototype. This linking offers real-time communication amongst MATLAB/Simulink and the PLC (BR 2005). Control procedures have to be written in a worldwide programmable language supported by both MATLAB and PLC, because of its broadcast into the PLC. The Control procedures established in the simulations can be used in a different area such as in the control of heating devices at home for purposes of temperature regulation. the control algorithms can also be used in industries among other place. The presence of Simulink has been a major boost in innovations. 3.3.1 Environment Many advantages can be associated with Simulink. The advantages experienced by Simulink users are in its ability to provide the right set of tools for fast, accurate modeling and simulation. Simulink is designed to facilitate extensive features of block library for developing complex models. It is also designed to be convenient tools for monitoring simulation results, and tight integration. This is facilitated by the presence of MATLAB, which aids in accessing the most comprehensive collection of design and analysis tools. 3.3.3 FMI-Toolbox The FMI Toolbox for MATLAB fits in Modelica-based physical prototyping into the MATLAB/Simulink surroundings. FMI Toolbox offers the following core features, FMI toolbox permits the Simulation of assembled vibrant prototypes, FMUs, in Simulink. An FMI-compliant device such as OPTIMICA Studio by Modelon, SimulationX or Dymola, may generate fMUs. The Simulink FMU block offers realization of limits and input values as well as block results. FMI toolbox also enables Export of Simulink prototypes to FMUs. FMUs may also be simulated in FMI accommodating simulation device such as SimulationX or Dymola. FMI toolbox may also be used for the Simulation of assembled vibrant prototypes, FMUs; using MATLABs built-in integrators, for example, ode45 and ode15s. This piece makes FMI Toolbox beneficial for operators without them having to contact to Simulink. The other advantage of an FMI toolbox is that it facilitates the Static and dynamic analysis of FMUs through design-of- experiments (DoE) functions for optimization, calibration, control design, and robustness analysis. The dynamic analysis features require the MATLAB Control System Toolbox. The FMI Toolbox supports FMI import for Model Exchange and FMI for Co-Simulation. FMI Toolbox also supports FMI export and a DoE analysis for Model Exchange 1.0. In an FMI Toolbox, Simulink models can be exported as Model Exchange. †¢FMI Toolbox also supports improved handling of FMU blocks that are supported by Simulink Coder/Real-Time Workshop usually stored in a Simulink library. 3.3.4 FMU export from Simulink A Simulink prototype can be pass on as an FMU and introduced in an FMI-compliant device such as OPTIMICA Studio by SimulationX, Dymola or Modelon. This section describes how a Simulink model can be exported as an FMU. Code from a Simulink model is generated by Simulink Coder/Real-Time Workshop and is then wrapped in an FMU for Model Exchange 1.0 or Co-Simulation 1.0. There are various steps required to export an FMU for Model Exchange from Simulink. The first step is usually to select the build target. This is usually done by opening the Configuration Parameters dialog. Then go to the Real-Time Workshop/Code Generation tab depending on the MATLAB version an individual is using at that particular time. From Browse button, select the System target file. The final step that takes place before exportation can take place is that of selecting fmu_me1.tlc from the browser dialog for exporting the FMU as Model Exchange or fmu_cs1.tlc for Co-Simulation, when either of the two is selected, click OK to export. However, FMU export limitations such as The FMU target uses the code format S-function and target type non real time. This means in general that the same limitations of Simulink Coder ´s native S-function target, rtwsfcn is applied to the FMU target. Complex input and output ports are not supported. There is no corresponding data type in the FMI standard.Another limitation of FMU is that Enumeration data types are not supported for example the Enumerated Constant block is not supported. Discrete variables (variability attribute set to discrete) may change the value at instants other than during initialization or at event instants. Support for precompiled S-functions is only supported for export of Model Exchange FMUs and not co- simulation. Co-simulation The main aim of co-simulation is to come up with a user-friendly interface type for connecting/joining simulation tools in its environs. The data exchanged in this models subsystems is limited to distinct communication targets. The communication interval among two sub-systems is controlled autonomously by respective subsystem solvers. The master algorithm is usually responsible for controlling the exchange of data among subsystems and the harmonization of complete simulation slaves (solvers). In this case, basic master algorithms and complex ones are supported. It is imperative nonetheless to note that the master algorithm is not a part of the FMI standard. Dymola 2013 and later supports export of prototypes (slaves) with built-in numerical slaves according to the FMI for Co-simulation specification. The SUNDIALS suite of numerical slaves (version 2.4.0) is used in the co-simulation FMUs. In Dymola 2013 and later, the translateModelFMU command will produce an FMU that supports both the FMI for Model Exchange requisite and the FMI for Co-Simulation slaves interface where by all responsibilities will be present in the DLL. Model simulation is also supported in Simulink. It is, however, important to note that when Simulink FMU block co-simulation FMUs with modelDescription attribute canRunAsynchronuously is set to true, they are usually not supported. References [Jak2003] Johan Ã…kesson. Operator Interaction and Optimization in Control Systems. ISRN LUTFD2/TFRT3234SE. Lund University. Sweden. 2003.

Why Modern Monsters Have Become Alien to Us :: Papers

Why Modern Monsters Have Become Alien to Us Late autumn has arrived and with it comes the dark magic of Halloween--and, of course, the murky thrill of monsters. Yet our appetite for a good monster knows no season. Ever since ancient times we have been fascinated with all sorts of tales about monsters and intrigued by myths and legends about those wild half-human beasts who haunt the edges of our forests and lurk in the recesses of our oceans. The sphinxes, minotaurs, and sirens of early mythology gave way to Beowulf's Grendel and Saint George's dragon, then to the mermaids, trolls, and one-eyed giants of our fairy and folk tales, and finally to those 19th-century Gothic classics. Nor are these stories on the wane, for the monster tales that made Lon Chaney, Boris Karloff, and Bela Lugosi stars of the silver screen continue to draw megacrowds six and seven decades later. In 1994 Kenneth Branagh and Robert DeNiro brought us the latest reincarnation of Shelley's story of Frankenstein's tortured creature, and Tom Cruise and Brad Pitt starred in "Interview with a Vampire," the first installment of Ann Rice's homage to Stoker'sDracula. Meanwhile, Andrew Lloyd Weber's musical production of Gaston Leroux's "Phantom of the Opera" continues to pack in audiences from London to L.A. Much of the initial appeal of monster stories comes from the fact that they, like their twisted siblings, "creature features" and "slashers," both terrify and fascinate us with their ghoulish brand of horror. It's the rattling-the-tiger's-cage kind of thrill that Scout and Jim Finch got from sneaking onto Boo Radley's porch under a pale moon. Reading or watching great monster stories, we get to accompany the frightened heroes or heroines as they descend into the dragon's lair; crane our necks over the tops of books or movie seats and peek into the dank recesses of the giant cyclops' cave; stretch out our trembling hands and actually touch the monster's reptilian scales, hairy paws, or cloven hoofs; and then run screaming like a banshee the instant it wakes from its slumber. What a rush! As frightening as these creatures are, in monster stories it is always the beast that ends up taking the fall, which means that this is a place where we not only get to tangle with evil's most daunting and dangerous minions but to vanquish them with regularity. Pretty heady stuff.

On Immigration Issue: Hilary Clinton and Barack Obama Essay

Barrack Obama and Hilary Clinton had both express their plans about the reformation of the immigration system in the country. Currently, America’s population is increasing fast. However, there are several who are not listed as legal migrants of the country. According to the website of Ohama, the number of undocumented immigrants had increased for more than 40 percent since the year 2000. This shows that there is an approximate of five hundred thousand people who lives illegally or who overstays in the country every year. Immigration raids are ineffective because an estimate of 3,600 arressts were made in the year 2006. This only shows that the ratio against the number of discovered illegal immigrants versus the total number of illegal immigrants does not even reach 1%. (barrackobama.com, 2008) Barrack Obama had planned on create securing borders for the country. He had stated in his plans that he is very willing to back-up the integrity of the borders. He would implement this through providing additional people, infrastructure and technology needed on the borders and points of entry of the country. Obama wants the system to work in a real time manner so that the immigrants who had been reviewed as illegal would be easily deported to his or her country of origin. The same as Obama, Hilary Clinton wants to know who is in the country through the security of the country’s border. She also agrees in having a new technology that would help stop the flow of illegal immigrants in the country. Both Obama and Clinton had pointed out the security of the border. However, Obama’s plan had been more specific as to what actions must the government take in order to secure the borders. Clinton had stated the security of the borders but she did not tell what particular aspect of security must be done to the border. Hilary Clinton had mentioned in her plans that the employers must follow the law against employing and exploiting illegal immigrants. Clinton had proposed that a new technology to help stop the flow of undocumented immigrants in the country and an employer verification system that is universal, accurate and timely. Barrack Obama on the other hand would remove incentives for immigrants to enter the country illegally. This would be done by pinpointing the employers who hire undocumented immigrants. Upon identification of these employers, corresponding punishment would be done to these employers who had been found to hire illegal immigrants. Looking at the plans of both Presidential candidate, Hilary Clinton’s suggestion on the implementation of a technology for illegal employment is a good measure to determine automatically who are the illegal immigrants. Barrack Obama’s plan concentrated on the employers and the corresponding punishment that would be given to such. The difference between these plans is that Hilary wants to determine the illegal immigrants and the employers while Barrack wants to know the employers only and not the illegal immigrants of the country. Among the laws and regulations that both candidates wanted to prioritize it is the family of the illegal immigrant and the illegal immigrant. Hillary plans to repair the immigration system. She had stated that the current immigration system at times is the reason why families are damaged and forced to be apart because of the current laws. As such, Hillary Clinton had noted a national interest in the families. She had introduced an amendment during the consideration of the immigration reform bill that would protect the family. Obama’s plan is to fix the immigration bureaucracy and increase the number of allowed legal immigrants to be with their families and meet demand for jobs that employers cannot fill. Obama had noted in his plans bringing out illegal immigrants out by providing a system that would allow illegal immigrants to gain legal status if the immigrant is in a good standing to pay a fine, learn the English Language, and law-abiding in order to become citizens of the state. He had also included in his plans to expedite citizenship to the military troops who are foreigners and serves America. This population is around 5% of the total US troops population. Hilary Clinton was not able to take note of this things on her plans in immigration. However, she had noted facts on the impact of immigration policies on the workers. She would take note of the worker programs that exploit workers and creates cheap labor that undermines the wages of the U.S. workers. The right of a worker to work in safe conditions with decent wages had been noted in her plans. Clinton would support Ag Jobs programs. This program is about keeping agricultural industry lively and enable agricultural workers fair wages and labor protections that they need. As a conclusion, both candidates have noted several important issues that needs to be tackled regarding Immigration. Both had determined that the undocumented immigrants must be known. The large number of illegal immigrants in America is very alarming that is why, both of them had created plans immediately in order to contain the problem. Hilary Clinton had addressed the issue of border security, illegal immigrant employment, immigrant family choice and cheap labor exploitation. Barrack Obama on the other hand had addressed border security, illegal immigrant employment, honorary of the immigrant troops and converting illegal immigrants into citizens. Based on the presented plans, Obama’s show more details and also looks on the realistic side of the problem. Specific solutions are specified in his plans and this has made his plan more realistic. Works Cited: Obama 2008. â€Å"Immigration†. 2008. Obama for America. 28 March 2008. Online: Hillary Clinton for President Committee. â€Å"Reforming Our Immigration System†. 2008. Hillary for President 2008. 28 March 2008. Online: < http://www.hillaryclinton.com/issues/immigration/>

Organizational Analysis Paper of the American Heart Association Essay

I will be discussing in detail the creation and reasons of the American Heart Association, it’s importance, the functions and responsibilities of the American Heart Association, the stakeholders’ impact towards the American Heart Association and what are the affects as a stakeholder. Keywords: American Heart Association, functions, responsibilities, stakeholders Birth of the American Heart Association The American Heart Association has evolved into a nation-wide program since its birth in the 1915. According to American Heart Association (2010) a group of social workers and doctors in New York formed the Association for Prevention and Relief of Heart Disease. Due to the minimal information regarding heart disease people with heart disease are considered doom and most were in bed rest. Many doctors research and studied to determine if people with heart disease could return to a normal life and also return to work. Soon, associations started to form along the East Coast, mainly in Boston, Philadelphia, and Chicago in the 1920s. In 1924, six cardiologists together form the American Heart Association. Their main goal was to share research from cities across the United States and Canada and promote further study. According to American Heart Association (2010), the six cardiologists were Drs. Lewis A. Connor and Robert H. Hasley of New York, Paul White of Boston, Joseph Sailer of Philadelphia, Robert B. Preble of Chicago, and Hugh D. McCulloch of St. Louis. Drs. James B. Herrick of Chicago and William S. Thayer of Baltimore were also instrumental with the founding of the association. See more: how to write an analysis paper There were no education or awareness of heart disease and their main goal was to inform many physicians and scientists of the seriousness of heart disease. American Heart Association, (2010) The American Heart Association thought of ways to share the research and studies to the public and in 1946, according to American Heart Association (2010) they received a donation from the American Legion of $50,000 to conduct a research and to develop a community rheumatic fever program. The AHA reorganized and a couple of years later, non-medical volunteers assisted in business management, fundraising, communication, and public education. The AHA made their public appearance on a radio contest in 1948 called â€Å"The Walking Man,† which netted $1. 75 million. The AHA started setting up divisions across the country the following year and raised $2. 7 million. Growth of the American Heart Association The growth of the AHA has been rapid, in numbers, financial resources, and influence, both national, and international. According to American Heart Association (2010), in order to better serve their affiliate and local divisions nationwide changes of the National Center from New York to Dallas was a better idea. Between 1980 and 1986, they made internal changes and wanted to make a louder and clearer voice in reaching out to the public. They developed guidelines for the national health care system. While the federal government attempt to make changes and improvements AHA supported them at the same time continuing to strengthen internal management and programs. As they made changes AHA also concentrated on their mission statement and three areas of specialty important to AHA: cardiovascular science, cardiovascular education, and community programs. The AHA supported new research projects, move scientific staff into one building and sponsor creative professional education programs. Women and minorities were part of the association’s leadership ranks and resulted in more efforts and understanding of heart and stroke disease on women and minorities. In the 1990s, scientific finding began to move more quickly from laboratories and clinics to the physician offices and American households. They outsourced through journals and publishing online. Their strategy was improving affiliate research programs and creating new divisions dealing with stroke and emergency cardiac care. In November 1998, the AHA created a division called the American Stroke Association, which developed stroke education programs, stroke-related research and supported stroke victims and their caregivers American Heart Association (2010). According to American Heart Association (2010) in 2007, a budget of $700 million was granted in support of research, community programs, advocacy, public, and professional education. AHA used the funds for research on CPR training, pacemakers, microsurgery, bypass surgery, life-extending drugs and artificial heart valves. AHA focused on sending out a message emphasizing society to quit smoking, control blood pressure, dieting, be physically active, and maintain a healthy weight. The AHA is also a provider for first aid. Functions and Responsibilities of American Heart Association According to Stover, E (n. d. ), the AHA is a nonprofit organization and is a voluntary organization funded mostly by donors. The AHA depends on more than 3. 7 million people to carry out its goals and have raised over $1 billion since 1949. They create annual goals, taking on the responsibility of reducing heart disease and stroke. For example, in 2009, the goal of the AHA was to reduce smoking, lower high blood pressure and cholesterol. They reduced it by 25% by 2010. The responsibility of the AHA is to divide the organization’s responsibilities into seven areas whereas eight main offices operate nationwide. The seven areas include the office of chief executive, the advocacy division, corporate operations, field operations, healthcare market division, science operations and customer technology strategies, Stover, E (n. . ). The mission of the AHA is â€Å"Building healthier lives, free of cardiovascular diseases and stroke. † Stakeholders in the American Heart Association There are a number of stakeholders involved with the American Heart Association. They include volunteers, employees, partners, vendors, and customers. They play an important part in the function and day to day operations of the AHA. Without the volunteers and employees, the AHA would cease and the American public would not obtain the latest information on preventing heart disease and stroke disease. Without vendors and partners, the AHA would not have the funds and support to make breakthroughs in further preventing heart disease and stroke disease. Without customers, the AHA would not have information for their studies and research to find new medicines or technology to prevent these diseases. So everyone has an important part to the success and expansion of the AHA. The American Heart Association has been a major influence of the lives of the public both nationally and internationally. They have given the public a better nderstanding of what heart and stroke disease are and the seriousness of these diseases. They also have programs and educational material available on what he or she can do as a patient as well as a supporter to make a difference in his or her life and to prevent from getting these diseases. They have classes on CPR and first aid in the event that they encounter someone who is suffering from a heart disease or stroke. I think that without the AHA, there would be a high rate of people dying from these diseases and people would not know what to do if they come across this disease or prevent it.

Free Essays on Accountants

Thesis: An accountant has many choices to what particular field of accounting to specialize in depending on the financial information she wants to analyze and how it is done. Class: Accountants Special Interest: Analyzing Financial Information Subclasses: Financial accountants Tax accountants Internal auditors A college student decides she wants to become an accountant. General accounting and bookkeeping classes can be taken in high school. In college, the student needs to decide on a more specific field of accounting. An accountant has many choices as to what particular field of accounting to specialize in depending on the financial information she wants to analyze and how it is done. Financial accountants, tax accountants and internal auditors are all accountants in general, but require different training and work methods. A financial accountant records economic data and periodically prepares reports that show profit and other financial information of a company using the generally accepted accounting principles. The reports prepared by the accountant are useful for managers, and also for owners, creditors and the public. Based on information in the reports the public can use the reports to choose a company to invest in. Because a financial accountant is employed by an individual company, she is considered a private accountant. Another type of accountant is a tax accountant. A tax accountant prepares yearly tax returns for individual clients. The accountants have to use constant data such as rates of pay and other information to determine the proper amount of taxes to be paid. These accountants have to take a class once a year to catch up on yearly changes in tax laws and regulations. If a tax accountant has met state experience requirements, she may want to take exams to become a Certified Public Accountant (CPA). A third type of accountant is an internal auditor. Auditors are sponsored by the Institute of Internal... Free Essays on Accountants Free Essays on Accountants Thesis: An accountant has many choices to what particular field of accounting to specialize in depending on the financial information she wants to analyze and how it is done. Class: Accountants Special Interest: Analyzing Financial Information Subclasses: Financial accountants Tax accountants Internal auditors A college student decides she wants to become an accountant. General accounting and bookkeeping classes can be taken in high school. In college, the student needs to decide on a more specific field of accounting. An accountant has many choices as to what particular field of accounting to specialize in depending on the financial information she wants to analyze and how it is done. Financial accountants, tax accountants and internal auditors are all accountants in general, but require different training and work methods. A financial accountant records economic data and periodically prepares reports that show profit and other financial information of a company using the generally accepted accounting principles. The reports prepared by the accountant are useful for managers, and also for owners, creditors and the public. Based on information in the reports the public can use the reports to choose a company to invest in. Because a financial accountant is employed by an individual company, she is considered a private accountant. Another type of accountant is a tax accountant. A tax accountant prepares yearly tax returns for individual clients. The accountants have to use constant data such as rates of pay and other information to determine the proper amount of taxes to be paid. These accountants have to take a class once a year to catch up on yearly changes in tax laws and regulations. If a tax accountant has met state experience requirements, she may want to take exams to become a Certified Public Accountant (CPA). A third type of accountant is an internal auditor. Auditors are sponsored by the Institute of Internal...

Open an unusual business or service in city of Diamond Bar Research Paper

Open an unusual business or service in city of Diamond Bar - Research Paper Example Diamond bar has a total population of 55544 people based on the census conducted in the year 2010; which form total population density of 3731.5 people per square mile or 1440.8 KM2 (City-data, 2013). Notable to mention is that this numbers are much lower than the population count that was conducted in the year 2000 of 56287 people (City-data, 2013). Based on the2010 census, the total racial makeup was proved to compose of 29144 (52.5%) Asians, 18434 (33.2%) whites (with 21.3% Non-Hispanic whites), 2288 (4.1%) African American groups, 178 (0.3% Native Americans, 106 (0.2%) Pacific Islanders, 3237 (5.8%) for other races, 2157(3.9%) from two or more races and finally the Hispano or the Latino forming 20.1% 11138 people (Quickfacts.census, 2014). According to the statistics gathered in 2010, it is evident from the data that there were 17880 household in diamond bar (Quickfacts.census, 2014). Out of the entire population, it emanated that 102 or 0.2% of the households were living on non-institutionalized group’s quarters while 27 or 0% were living on institutionalized quarters (Quickfacts.census, 2014). Furthermore, basing on age groups, out of the registered 17880 households, it is only 39.2% or 7008 households that had children who were under the age of 18 and this related to 11895 children (City-data, 2013). In addition to this, it was recorded that 5590 (10.1%) people were aged 18 to 24, 13585 (2.5%) people were 25 to 44 years, 17988 (32.4%) were found to aged between 45 to 64 years (City-data, 2013). The elderly people in Diamond bar city which was composed of individuals with 65 years and above formed a population of 6486; relating to 11.7% of total population recorded in 2010 (City-data, 2013). The social status of Diamond Bar revealed that 66% or 11792 of the total population were married opposite sex couples, 2.8% (496) were mature unmarried opposite sex people, 71 (0.4%) were same

Business Law Questions Essay Example | Topics and Well Written Essays - 2000 words

Business Law Questions - Essay Example The law of agency can be construed by a sharp attorney representing a plaintiff to support a transfer the ownership of a property in question to the agent in a similar way as alter ego theories. Basically, the agency law in PCV situations involves an array of agreements that bring together the agent, and the principal in which case the former becomes mandated under the law to assume the responsibilities of the latter to formalize a legitimate agreement to work with a third party (Steinberg, 2012). Under such a scenario, the agent automatically assumes the principal’s role, thus can enter into business deals and negotiation with third parties. According to Steinberg (2012), the agency law guides the operation of agents and the third parties whom they have business dealings with; and provides for principals to play a second fiddle to the agents when the latter acts on their behalf. The reciprocal privileges and responsibility between signatory parties to a contract mirrors business and legal practicalities. A business proprietor usually relies on a worker or another individual to operate an enterprise. When dealing with a corporation, which generally is a conjured legal entity, human agents take precedence. In such a case the principal is required by the law, through the agreement signed by the agent to play a second fiddle in the running of the business or being held responsible in case of any liability. An agent’s lawyer can therefore argue that the law grants the agent sweeping powers to execute his or her role within the jurisdiction of the organization to exercise his or her will. When an agent legally assumes c ontrol of the business, a third party may entrust his or her details and deals with the agent and enter into an agreement with the principal’s representative if he or she introduces himself so (Brams, 1999). And owing to the technicalities witnessed by those who would want to corroborate the identity and or authority of the agent, most of third parties often show willingness to work with the agent and disregard any other party regardless of their superiority. It is in such a scenario, the corporation can be deemed as the â€Å"alter ego† of the agent. Agency powers The law of agency provides the agent with three legal milestones that whoever occupies the position can tacitly exploit to his or her advantage. First, the agency enjoys actual authority. Actual authority which is enjoyed by the plaintiff often arises in two ways: either where the principal expressly confers power on the agent, or where the authority is implied (Brams, 1999). Authority is a product of consen sus, and its implementation is usually based on fact. Therefore, the law of agency grants the agent protection from the principal, especially where the former has acted within the agency’s mandate, as provided for under implied powers. Secondly, implied actual authority, or the usual authority, refers to powers that an agent enjoys by virtue of being fairly necessary to exercise his or her express authority. Implied actual authority can be assumed by the agent owing to his or her role as the principal’s proxy (Steinberg, 2012). In a nutshell, in any case the agent makes a decision regarding the business they have assumed control of, the decision is deemed binding and the principal will be expected to comply with the agent’s move. Such a scenario makes the property in the hands of the agent an alter ego of himself or herself. Question 2: Hypothetically, starting from a blank state legislative slate, the only form of business organization that would be needed toda y would be the Limited Liability Company form. Analyze and critique this statement. A limited liability company (LLC), is a corporate structure that